Voice_Data

Voice_Data_Video

AT8L

(REPLACES 100B)

TONE TEST SET

Digital interaction with LAN hubs and switches
Splitable tone connections for tracking LAN cable
LAN Hub tracking with activity light blinking
LAN Hub detection
Telephone service indicator
Powered Ethernet check
Short circuit check
Selectable tracing tone sounds
Series-connectable breakout adapter
Works in RJ11 and RJ45-type jacks
Low battery indicator

Specifications

Tracing transmitter signal power +15 dBm, 7.5 V peak

Transmitter OFF voltage tolerance 60 V

Transmitter battery life 25 hours, nominal (Requires one 9 VDC battery for the transmitter)

Dimensions 5.7 x 6.4 x 3.2 mm (2.25"W x 2.5"H x 1.25"D)

Receiver dimensions 22.9 x 5.4 x 2.9 mm (9"W x 2.125"H x 1.125"D)

Complete kit weight 409 grams (14.4 ounces)

100B_50086677
Weight: 0.90 lbs

100C

FITS 100B & AT8L

LEATHER CASE FOR 100B -- AT8L

50086685
Weight: 0.18 lbs

1052011

TEST SET, BASIC, SM, DIN-PC

These conveniently packaged test sets are used to test, troubleshoot and maintain telco, CATV, LAN and other single-mode network applications. The Basic Set can be used to measure output power and certify end-to-end attenuation on deployed fiber spans.
Easy-to-use, all-in-one prepackaged kit.
Dual wavelength 1310/1550nm source covers all requirements.
Source has stable, calibrated output.
Rugged, splashproof instruments.
Water- and air-tight hard carrying case.
Meets the link certification

Specifications

PACKAGE: Handheld

SOURCE TYPE: Laser

CALIBRATION WAVELENGTHS (nm): 1310/1550

MEASUREMENT RANGE: +3 to -60dBm

MEASUREMENT UNITS: dB, dBm

Single-mode

50606079
Weight: 1.20 lbs

105202K

TEST SET, BASIC, SM, FC-PC

These conveniently packaged test sets are used to test, troubleshoot and maintain telco, CATV, LAN and other single-mode network applications. The Basic Set can be used to measure output power and certify end-to-end attenuation on deployed fiber spans.
Easy-to-use, all-in-one prepackaged kit.
Dual wavelength 1310/1550nm source covers all requirements.
Source has stable, calibrated output.
Rugged, splashproof instruments.
Water- and air-tight hard carrying case.
Meets the link certification

Specifications

PACKAGE: Handheld

SOURCE TYPE: Laser

CALIBRATION WAVELENGTHS (nm): 1310/1550

MEASUREMENT RANGE: +3 to -60dBm

MEASUREMENT UNITS: dB, dBm

Single-mode

50606086
Weight: 1.20 lbs

105203K

TEST SET, BASIC, SM, ST-PC

Specifications

PACKAGE: Handheld

SOURCE TYPE: Laser

CALIBRATION WAVELENGTHS (nm): 1310/1550

MEASUREMENT RANGE: +3 to -60dBm

MEASUREMENT UNITS: dB, dBm

Single-mode

50606093
Weight: 4.75 lbs

105206K

TEST SET, BASIC, SM, SC-PC

Specifications

PACKAGE: Handheld

SOURCE TYPE: Laser

CALIBRATION WAVELENGTHS (nm): 1310/1550

MEASUREMENT RANGE: +3 to -60dBm

MEASUREMENT UNITS: dB, dBm

Single-mode

50606109
Weight: 0.12 lbs

10520E2

TEST SET, BASIC, SM, E2000-PC

Cat No.	UPC No.	Description

10520E2	60611	Basic SM Test Set, E2000-PC

50606116
Weight: 0.12 lbs

1062

ADAPTER, CONN-SOC SC-PC

50605751
Weight: 0.05 lbs

1102-5000

TONEARC

50605232
Weight: 33.21 lbs

1112-5004

BATTERY PACK

50605249
Weight: 22.25 lbs

1134-5029

SIDEKICK,7B

Determines the stressed noise suceptibility of dry and working pairs.
Measures resistance, AC/DC volts, and capacitive kick.
Provides tone for twisted pair or crossed conductor identification.
Single setup for testing Tip-Ring, Tip-Ground, and Ring-Ground.
Minimal drying effect in all ranges.
Field replaceable leads.
Softcase with adjustable strand hook.
Low Battery indicator light.

60525
Weight: 2.30 lbs

1137-5002

SIDEKICK,T & N

Five transmission and noise tests.
Determines the stressed noise susceptibility of dry and working pairs.
Measures resistance, AC/DC volts, and capacitive kick.
Provides tone for twisted pair or cross conductor identification.
Single setup for testing Tip-Ring, Tip-Ground, and Ring-Ground.
Minimal drying effect in all ranges.
Field replaceable leads.
Softcase with adjustable strand hook.
Low battery indicator light.

60526
Weight: 2.94 lbs

1143-5000

SIDEKICK,VOC

50605270
Weight: 3.10 lbs

115202K

TEST SET, DELUXE, SM, FC-PC

Cat No.	UPC No.	Description

115202K	60615	Deluxe SM Test Set, FC-PC

50606154
Weight: 5.75 lbs

115203K

TEST SET, DELUXE, SM, ST-PC

50606161
Weight: 0.12 lbs

115206K

TEST SET, DELUXE, SM, SC-PC

50606178
Weight: 0.12 lbs

11520E2

TEST SET, DELUXE, SM, E2000-PC

50606185
Weight: 0.12 lbs

1185-5001

TAGGER,VOICE (TR-1185)

Specifications

Electrical

Range 9 cable miles

Warble Tone Signal 460/920 Hz alternating

Power Source One 9 VDC battery (NEDA1604 or 6LR61)

Mechanical

Length 140 mm (5.5 inches)

Height 32 mm (1.25 inches)

Width 70 mm (2.75 inches

50605188
Weight: 1.30 lbs

1620

ADAPTER, SOC FC-160L

50605829
Weight: 0.50 lbs

1630

ADAPTER, SOC ST-160L

50605805
Weight: 0.05 lbs

1662

ADAPTER, SOC SC-160L

50605812
Weight: 0.50 lbs

177

PRECISION TONE GENERATOR

Specifications

Power Requirements One 6V lantern battery

Battery Life 40 hours nominal

Transmitter Frequency 577.5Hz pulsed at 1Hz, crystal controlled

Output Voltage 0.1 to 80Vp-p

Output Signal Level 0 to +30dBm

Construction High impact ABS plastic in woven polyester case

Dimensions 7.25" x 5.5" x 4.5" in case

Weight 3 lbs. with battery

50086570
Weight: 3.56 lbs

1900

STRIPPER (1900)

For power and telecommunications cables.
Capacity: 3/16" - 1 1/8" dia. (4.5 - 29 mm dia.)
(#8 AWG-600 kcmil (MCM) THHN)
90° blade rotation allows longitudinal, circular, and spiral slitting
of insulation.
Easy blade depth adjustment

50458248
Weight: 0.28 lbs

1901

STRIPPER (1901)

For power and telecommunications cables.
Capacity: 3/4" - 1 1/2" dia. (19-40 mm dia.)
(300 kcmil (MCM)?1250 kcmil (MCM) THHN)
Strips solid conductor, stranded conductor and multiple
conductor cables.
Easy blade depth adjustment.
Blade rotates for circular, longitudinal and spiral cuts.

50458230
Weight: 0.30 lbs

200B

INDUCTIVE AMPLIFIER

50086693
Weight: 0.25 lbs

200C

LEATHER CASE FOR 200 SERIES

50086707
Weight: 0.21 lbs

200EP

INDUCTIVE AMPLIFIER

50086715
Weight: 0.40 lbs

200FP

FILTER PROBE-INDUCTIVE AMPLIFIER

50086723
Weight: 0.35 lbs

200GX

AMPLIFIER, IND 200GX

50605577
Weight: 0.15 lbs

252A

LED SOURCE, UCI-850/1300NM

50605638
Weight: 0.12 lbs

252B

LED SRCE, DUAL 850/1300

50605300
Weight: 1.05 lbs

253B

LED SOURCE, 660NM

50605317
Weight: 1.00 lbs

255A

LED SOURCE,1310NM (UCI)

50605324
Weight: 0.12 lbs

255MT

LED SOURCE, MTRJ 1300

50605331
Weight: 1.00 lbs

257A

LED SOURCE,850NM (UCI)

50605355
Weight: 0.12 lbs

257MT

LED SOURCE, MTRJ 850

Test insertion loss of multimode MT-RJ fiber optic cables and connectors, or pair with an optical power meter for link loss testing of installed cable plants.
Stable, calibrated output.
Proven, reliable and compact design.
Easy-to-use; two buttons control all essential functions.
Rubber boot protects against dropping and crushing.
Rugged and splashproof.
257MT model has an 850nm wavelength.
Nominal output for 62.5/125 is -20dBm for both 850nm and 1300.
Continuous and alternating output modes.
Fixed MT-RJ interface.
User selectable auto shutoff.
Two AA batteries provide power for over 24 hours.
Optional AC power converter/adapter is available for prolonged or benchtop use.

Specifications

SOURCE TYPE: LED

WAVELENGTHS (NM): 850

OPTICAL INTERFACE TYPE: Fixed MT-RJ

Continuous and Modulated Output Modes

User-selectable Auto Shutoff

Multimode (glass)

50605362
Weight: 1.00 lbs

262A

LSR SRCE, DUAL 1310/1550

Performs single-mode insertion loss and link loss measurements when paired with an optical power meter.
Single output interface simplifies dual wavelength measurements.
Stable, calibrated output.
Proven, reliable and compact design.
Easy-to-use; three buttons control all essential functions.
Rubber boot protects against dropping and crushing.
Rugged and splashproof.
Single unit toggles between 1310nm and 1550nm wavelengths.
Fabry-Perot laser diodes.
Calibrated output power is nominal -7

Specifications

SOURCE TYPE: Fabry-Perot Laser

WAVELENTHS (NM):1310/1550

OPTICAL INTERFACE TYPE: UCI Universal

Continuous and Modulated Output Modes

User-selectable Auto Shutoff

Single-mode

50605645
Weight: 1.05 lbs

263LX

FAULT FNDR, FC-PC VIS

50605386
Weight: 0.75 lbs

263MT

FAULT FNDR, MTRJ VIS

50605393
Weight: 0.75 lbs

265A

LASER SRCE, UCI-1310NM

50605652
Weight: 1.00 lbs

266A

LASER SOURCE, 1550NM

Performs single-mode insertion loss and link loss measurements when paired with an optical power meter.
Stable, calibrated output.
Proven, reliable and compact design.
Easy-to-use; two buttons control all essential functions.
Rubber boot protects against dropping and crushing.
Rugged and splashproof.
265A has a 1310nm wavelength and -7dBm output for single-mode testing.
266A has a 1550nm wavelength and -7dBm output for single-mode testing.
Continuous and modulated output modes.
User-sel

Specifications

SOURCE TYPE: Fabry-Perot Laser

WAVELENTHS (NM): 1550

OPTICAL INTERFACE TYPE: UCI Universal

Continuous and Modulated Output Modes

User-selectable Auto Shutoff

Single-mode

50605447
Weight: 0.12 lbs

402K