DTAP3/8-16 DRILL TAP COMBO BIT
3/8-16 THD

• Professional grade laser level.

• Mini torpedo design with handy “no dog” attachment for bending.

• three rare earth magnets provide superior holding strength.

• Compact size with 80-plus yard range.

• Laser is capable of working on all planes.

• Four vial design – 0°, 90°, 45° and 30°.

• V-groove on top of level for easy view of vials.

• Offsets and calculations permanently laser engraved onto level.

SPECIFICATIONS

Length: 5.63 inches

Width: .75 inches

Height: 1.81 inches

Weight: 7.3 oz with batteries

Self-Feeding Spade Bits

Whether you’re trying to drive, drill, punch or knock out holes,
you’ve always known the name Greenlee is synonymous
with holemaking. That’s because we consistently listen to the
customer in order to bring new innovative holemaking
products to market that are designed to make your job faster,
safer and easier. Now, Greenlee’s developed the latest
in spade bit technology. This design requires considerably
less force to accomplish the hole, which reduces operator
fatigue and increases user comfort. [more]

L107 Electrician's Torpedo Level

The Greenlee L107 Electrician's Torpedo Level is the newest
addition to the level category. 
The L107 Electrician's Torpedo is useful in a variety of applications
including aligning conduit, checking clearance for runs
and aligning fixtures. 
The L107 has four rare earth magnets which allow
for hands-free use on metal surfaces. [more]

Ultra Tugger 2 Cable Puller

With the new Greenlee 2000 lb. Ultra Tugger® 2,
you'll have the pulling force you need and can adjust
to accommodate the job. 
The new UT2 is lightweight and mobile on the jobsite,
easily attaches to conduit with no loose parts
and is self-contained with an integral motor designed specifically
for cable pulling applications.  And, it's made in the U.S.A. 
All of these features make the new Greenlee UT2 an
easy choice when compared to the competition. [more] 

SF-530 Multiscanner

The SF-530 Multiscanner has many of the same features
of the SF-420AC but also includes a large, backlit LCD
display for easy viewing in poorly lighted areas and metal finding capabilities. 
The easy-to-understand, on-screen graphics add to the simplicity
of this product.  The SF-530 Multiscanner finds copper and
other non-ferrous metal up to 1 - 1/2" deep (38 mm) and
ferrous metal, such as rebar, in concrete up to 3" deep (76 mm).
[more]

SF-420AC Stud Sensor

Greenlee's SF-420AC Stud Sensor with AC detection finds
wood and metal studs and joists behind walls, floors,
and ceilings up to 1 - 1/2" inches (38 mm) deep and indicates
the presence of energized AC voltage. 
The SF-420AC Stud Sensor may be used in Stud Scan
mode or DeepScan® mode.  Stud Scan mode is used for depths
up to 3/4" (19 mm) and DeepScan® mode is used for depths up
to 1 - 1/2" deep (38 mm) which provides the electrical
worker with much needed versatility. [more]

GT-15 Non-Contact Low Voltage Detector

The GT-15 noncontact voltage detector’s bright LED
and audible alarm indicate the voltage is present.
This detector meets all the requirements of the UL
and has a safety rating of Category III, 300V AC.
This rating is more than sufficient for most low voltage
applications. The cushioning grip provides for hours
of tireless use and the convenient pensize device
easily fits into pockets or tool pouches.
The GT-15 also has a Lifetime Limited Warranty. [more]

Metric/Standard Drill/Tap Bit Kits

Greenlee’s Combination Drill/Tap Bits go metric.
The new metric Drill/Tap is a combination drill bit
that allows the end-user to drill, tap and countersink
a metric hole in one motion, just as Greenlee’s
standard Combination Drill/Tap already does.
This new product can be used by electrical,
HVAC, plumbing, automotive and DIY end-users
that need tapped metric holes in material 10 gauge or less.
Greenlee is also introducing two new larger standard
size Drill/Tap bits (5/16) and (3/8) to meet
end-user needs when it comes to heavier metal construction.
 [more]