SF-530 Multiscanner

The SF-530 Multiscanner has many of the same features
of the SF-420AC but also includes a large, backlit LCD
display for easy viewing in poorly lighted areas and metal finding capabilities. 
The easy-to-understand, on-screen graphics add to the simplicity
of this product.  The SF-530 Multiscanner finds copper and
other non-ferrous metal up to 1 - 1/2" deep (38 mm) and
ferrous metal, such as rebar, in concrete up to 3" deep (76 mm).
[more]

SF-420AC Stud Sensor

Greenlee's SF-420AC Stud Sensor with AC detection finds
wood and metal studs and joists behind walls, floors,
and ceilings up to 1 - 1/2" inches (38 mm) deep and indicates
the presence of energized AC voltage. 
The SF-420AC Stud Sensor may be used in Stud Scan
mode or DeepScan® mode.  Stud Scan mode is used for depths
up to 3/4" (19 mm) and DeepScan® mode is used for depths up
to 1 - 1/2" deep (38 mm) which provides the electrical
worker with much needed versatility. [more]

GT-15 Non-Contact Low Voltage Detector

The GT-15 noncontact voltage detector’s bright LED
and audible alarm indicate the voltage is present.
This detector meets all the requirements of the UL
and has a safety rating of Category III, 300V AC.
This rating is more than sufficient for most low voltage
applications. The cushioning grip provides for hours
of tireless use and the convenient pensize device
easily fits into pockets or tool pouches.
The GT-15 also has a Lifetime Limited Warranty. [more]

1000A AC Clamp Meter

CAT. NO. UPC NO. DESCRIPTION
CM-1300 07732 Clamp Meter

CM-1300-C* 10860* Clamp Meter *Includes certificate of calibration

Amperage Measurement 0 - 400.0, 1000A
Voltage Measurement AC V: 400.0, 750 V; DC V: 400.0, 1000V
Resistance 0-400.0.
Frequency 0.400kHz
Display 4000-count LCD display
Jaw Opening 2.0" (51 mm)
Measurement Category Cat IV, 600V per IEC 61010-1;Cat III, 750V AC/1000V DC per UL 3111-1

CAT. NO. UPC NO. DESCRIPTION
CM-1350 07733 True RMS Clamp Meter

(CM-1350-C* 10861* True RMS Clamp Meter *Includes certificate of calibration)

Amperage Measurement 0 - 400.0, 1000A
Voltage Measurement AC V: 400.0, 750V; DC V: 400.0, 1000V
Resistance 0-400.0. Frequency 0.400kHz
Display 4000-count LCD display Jaw Opening 2.0" (51 mm)
Measurement Category Cat IV, 600V per IEC 61010-1;Cat III, 750V AC/1000V DC per UL 3111-1

1000A AC/DC Clamp Meter
• AC/DC amperage, AC/DC voltage, frequency and resistance measuring capability.
• Dual Hall sensor for the most accurate measurements.
• Easy to read backlit display for use in low light conditions.
• Peak and data hold to capture measurement.
• MIN/MAX feature for added versatility.
• Analog bar graph to view quick changes.
• Audible continuity test
• Selectable Auto Off for longer battery life.
• Accessories included: (2) 1.5 V AA batteries, test leads, carrying case

CAT. NO. UPC NO. DESCRIPTION
CM-1500 07798 Clamp Meter

(CM-1500-C* 10862* Clamp Meter *Includes certificate of calibration)

SPECIFICATIONS
Amperage Measurement 400.0, 1000A
Voltage Measurement AC V: 400.0, 750V; DC V: 400.0, 1000V
Resistance 400.0.
Frequency 0.400kHz
Display 4000-count LCD display
Jaw Opening 2.0" (51 mm)
Measurement Category Cat IV, 600V per IEC 61010-1;Cat III, 750V AC/1000V DC per UL 3111-1

CAT. NO. UPC NO. DESCRIPTION
CM-1550 07799 True RMS Clamp Meter

(CM-1550-C* 10863* True RMS Clamp Meter *Includes certificate of calibration)

Amperage Measurement 400.0, 1000A
Voltage Measurement AC V: 400.0, 750V; DC V: 400.0, 1000V
Resistance 400.0. Frequency 0.400kHz
Display 4000-count LCD display Jaw Opening 2.0" (51 mm)
Measurement Category Cat IV, 600V per IEC 61010-1;Cat III, 750V AC/1000V DC per UL 3111-1

• AC current measuring capability up to 300A.
• Compact size, fits easily into a tool pouch.
• Rugged, molded grip for protection.
• Peak and data hold to capture important readings.
Accessories included: (1) AA battery, test leads, carrying case.

CAT. NO. UPC NO. DESCRIPTION
CM-310 07558 AC Clamp-on Meter

Amperage Measurement 20.00, 200.0, 300A AC
Display 3-1/2-digit LCD, 2000-count
Jaw Opening 1.10" (28 mm)
Measurement Category Cat III, 600V per UL 3111-1

CAT. NO. UPC NO. DESCRIPTION
CM-400 07559 2-in1 Clamp-on Meter

AC Clamp (CM-400A)
Amperage Measurement 0-300A
Jaw Opening 1.18" (30 mm)
Voltage Output 10mV output per 1 amp input
Measurement Category Cat II, 600V per UL 3111-1
Multimeter (CM-400D)
Display 3-3/4-digit LCD, 3200-count with 65-segment analog bar graph
Voltage AC – 3.200, 32.00, 320.0, 600V; DC – 320.0mV; 3.200, 32.00, 320.0, 600V
Resistance 320.0.; 3.200, 32.00, 320.0k.; 3.200, 32.00M.
Measurement Category Cat II, 600V per UL 3111-1

CM-600 features:
• Both AC amperage and voltage measurement.
• Resistance measurement up to 2000.
• Auto power off for longer battery life.

CAT. NO. UPC NO. DESCRIPTION
CM-600 07593 AC Clamp-on Meter

CM-600-C* 07625* AC Clamp-on Meter * Includes Certificate of Calibration

Amperage Measurement 600A AC
Voltage Measurement 600V AC
Display 3-1/2-digit LCD, 2000-count
Resistance 2000. Jaw Opening 1.38" (35 mm)
Measurement Category Cat III, 600V per UL 3111-1

CAT. NO. UPC NO. DESCRIPTION
CM-800 07664 Clamp Meter

(CM-800-C* 10856* Clamp Meter *Includes certificate of calibration)

Amperage Measurement AC – 200.0, 600A
Voltage Measurement 400.0, 600V
Resistance 400.0. Frequency 0.400kHz
Display 4000 count LCD display
Jaw Opening 1.34" (34 mm)
Measurement Category Cat III, 600V per UL 3111-1

• True RMS for the most accurate measurement when harmonics are present
• AC amperage, AC/DC voltage, frequency and resistance measuring capability.
• Easy to read backlit display for use in low light conditions.
• Peak and data hold to capture measurement.
• MIN/MAX feature for added versatility.
• Analog bar graph to view quick changes.
• Selectable Auto Off for longer battery life.
• Accessories included: (1) 9V battery, test leads, carrying case.

CAT. NO. UPC NO. DESCRIPTION
CM-850 07666 True RMS Clamp Meter

CM-850-C* 10857* True RMS Clamp Meter *Includes certificate of calibration

Amperage Measurement AC – 200.0, 600A
Voltage Measurement 400.0, 600V
Resistance 400.0. Frequency 0.400kHz
Display 4000 count LCD display
Jaw Opening 1.34" (34 mm)
Measurement Category Cat III, 600V per UL 3111-1

CAT. NO. UPC NO. DESCRIPTION
CM-900 07699 AC/DC Clamp Meter

(CM-900-C* 10858* AC/DC Clamp Meter *Includes certificate of calibration)

Amperage Measurement 400.0, 600A
Voltage Measurement 400.0, 600V
Resistance 400.0. Frequency 0.400kHz
Display 4000 count LCD display
Jaw Opening 1.38" (35 mm)
Measurement Category Cat III, 600V per UL 3111-1

CAT. NO. UPC NO. DESCRIPTION
CM-950 07700 AC/DC True RMS Clamp Meter

(CM-950-C* 10859* AC/DC True RMS Clamp Meter *Includes certificate of calibration)

Amperage Measurement 400.0, 600A
Voltage Measurement 400.0, 600V
Resistance 400.0.Frequency 0.400kHz
Display 4000 count LCD display
Jaw Opening 1.38" (35 mm)
Measurement Category Cat III, 600V per UL 3111-1

CAT. NO. UPC NO. DESCRIPTION
CMA-40 07530 Clamp-on Current Adapter

(CMA-40-C* 07605* Clamp-on Current Adapter * Includes Certificate of Calibration)

SPECIFICATIONS

Amperage Measurement 0.1-400A
Voltage Output 1mV per 1 amp input
Jaw Opening 1.18" (30 mm)
Measurement Category Cat III, 300V; Cat II, 600V per UL 3111-1

ADAPTER-CURRENT 600A AC/DC

CAT. NO. UPC NO. DESCRIPTION
CMA-60 07531 AC/DC Clamp-on Current Adapter

(CMA-60-C* 07606* AC/DC Clamp-on Current Adapter * Includes Certificate of Calibration)

Amperage Measurement 0-600A
Voltage Output 100 amp range – 10mV output per 1 amp input; 600 amp range – 1mV output per 1 amp input
Jaw Opening 1.38" (35 mm)
Measurement Category Cat III, 300V; Cat II, 600V per UL 3111-1

• Flexible clamp for easy "fishing" around a conductor.
• 3000A AC current measuring accessory.
• 24" long.
• Perfect for any multimeter that reads AC millivolts.

• Reads ground resistance down to 0.10..
• Fully autoranging with data hold to capture readings.
• Convenient alarm and 99-point memory functions.• Measures up to 30A RMS ground or leakage current.
• Measures currents down to 1mA.
• Accessories included: (1) 9V battery, molded carrying case, test resistance loop.

CAT. NO. UPC NO. DESCRIPTION
CMGRT-100 07653 Ground Resistance Tester

CMGRT-100-C* 07730* Ground Resistance Tester * Includes Certificate of Calibration

Ground Resistance Measurement 0.10 to 1200.
Ground/Leakage Current Measurement 299mA; 2.999A, 29.99A
Display 3-3/4-digit LCD, 2999-count
Jaw Opening 1.25" (32 mm)
Measurement Category Cat III, 150V per UL 3111-1

• High capacity 1000A AC/DC amperage measurement.
• 600V AC/DC voltage, frequency, and resistance measurements for maximum
versatility.
• Continuity and diode tests with audible and visual indicators.
• Accessories included: (1) 9V battery, test leads, carrying case.

CAT. NO. UPC NO. DESCRIPTION
CMI-100 07564 Industrial Clamp Meter

CMI-100-C* 07631* Industrial Clamp Meter * Includes Certificate of Calibration

Amperage Measurement 400.0, 1000A
Voltage Measurement AC – 4.000, 40.00, 400.0, 600V;
DC – 400.0mV; 4.000, 40.00, 400.0, 600V
Display 3-3/4-digit, 4000-count (9999 for frequency)
Frequency Voltage Mode 99.99, 999.9Hz; 9.999, 99.99, 800.0kHz
Current Mode 99.99, 999.9Hz
Resistance 400.0.; 4.000, 40.00, 400.0k.; 4.000, 40.00M.
Jaw Opening 1.81" (46 mm)
Measurement Category Cat III, 600V