VOICE/DATA/VIDEO

VDV010-019

VDV010-019
Weight: 1.00 lbs

Coaxial Cable All-in-One Tool for Hex-Crimp Connectors, RG6/59

Coaxial Cable All-In-One Tool

All-in-one hex connector installation for CATV, Home Theater, satellite and security system applications.
Machined steel cutting blade cleanly and easily cuts RG6 and RG59 coaxial cable.
Diamond-shaped stripping nests efficiently remove outer jacket of coaxial cable.
Precision ground stripping hole easily removes inner dielectric insulation without damaging the center conductor.
Two hex-crimping dies and a ring-crimping die quickly and accurately crimp F-Connectors to coaxial cable.
High carbon-steel body with black-oxide finish for corrosion resistance and durability.
Yellow grips enhance comfort and visibility, and allow quick identification.

VDV100-801

VDV100-801
Weight: 2.00 lbs

Dual Cart, Radial Stripper - RG6/59 2-Level (Blk) & UTP 1-Level (Blu) Cart

Dual Cartridge Radial Stripper

Designed for high-volume, multiple-type cable preparation environments.
Two "active" stripping cartridge-bays and third "storage" cartridge-bay.
One-piece construction ensures precise stripping and never requires adjustment.
Large finger loop promotes rotation during use.
Cartridges snap in from both sides for left or right-handed operation.
F-Connector "nest" assists with cable insertion.
Durable high-carbon steel cartridge cutting blades are ground and honed for long life.
Bright, highly visible color for easy identification.
Durable Delrin® resin for outstanding wear.
Delrin® is a registered trademark of DuPont.
Replacement cartridges available.

VDV110-003

VDV110-003
Weight: 0.10 lbs

Cartridge for Radial Strippers - RG6/59, 2-Level (Black)

Cartridge for Radial Strippers - RG6/RG59

Pre-set cutting-blades for precise, accurate and efficient coaxial cable stripping.
Durable high-carbon steel cutting blades are ground and honed for long life.
Patented "V" notch eliminates scoring of the center conductor.
Color coded for easy identification.
Meets industry standards established by the SCTE (Society of Cable Telecommunication Engineers).
Cartridge made from glass filled polycarbonate for superior strength and extended durability.

VDV110-004

Cartridge for Radial Strippers- RG7/11, 2-Level (Gray)

VDV110-004
Weight: 0.10 lbs

VDV110-802

Radial Cartridge Stripper with RG6/59 2-Level (Black) Cartridge

VDV110-802
Weight: 0.20 lbs

VDV113-804

Radial Cartridge Stripper with RG58/59/62 3-Level (Green) Cartridge

VDV113-804
Weight: 2.00 lbs

VDV120-005

Cartridge for Radial Strippers - UTP, 1-Level (Blue)

VDV120-005
Weight: 2.00 lbs

VDV120-006

Radial Stripper for UTP/STP Cable w/Hex Key

VDV120-006
Weight: 0.20 lbs

VDV211-007

VDV211-007
Weight: 2.00 lbs

Compression Crimper - Vertical, Multi-Connector BNC/F/RCA

Compression Crimper - Vertical, Multi-Connector

Fast reliable tool for CATV, Home Theater, Satellite and Security System applications where multiple-type connector installations are required.
Crimps compression BNC, F and RCA connectors to RG59, RG6, and RG6-Quadshield coaxial cables.
Vertical design for easy adjustment, insertion, crimping and removal of cable and connector.
Adjustable universal plunger tips and crimp-height with locking-nut ensure accurate crimps on multiple types of connectors.
Measuring guide beneath the plunger makes replicating the same compression setting efficient.
Ratchet mechanism is designed to prevent the release of the connector prior to full compression.
Steel body with black-oxide finish for corrosion resistance and durability.
Yellow and black grips enhance comfort, visibility, and allow quick identification

VDV212-008

VDV212-008
Weight: 0.50 lbs

Compression Crimper - Compact, F-Connector

Advanced do-it-yourselfer tool for fast, reliable F-Connector installation.
Steel body with black-oxide finish for corrosion resistance and durability.
Fixed plunger allows quick, easy insertion and removal of cable and connector.
Fixed plunger accepts many common F-connector compression fittings.
Compact tool with integrated handle lock.
Yellow and black grips enhance comfort and visibility and allow quick identification.

VDV212-009

VDV212-009
Weight: 2.00 lbs

Compression Crimper - Lateral, F-Connector

Compression Crimper - Lateral, Adjustable F-Connector

Professional tool for CATV, Home Theater, Satellite and Security System applications where reliable high-volume F-Connector installation is required.
Plunger tip can be adjusted to allow assembly of multiple compression F-Connectors.
High strength cast aluminum body for long life.
Lateral design with split jaw for easy insertion and removal of cable and connector.
Universal plunger tip, factory preset and calibrated for varied connector types (see table).
Yellow grip enhances comfort and visibility, allowing quick identification.
Calibration/gauge block and hex wrench included.
Additional Calibration/gauge blocks available.
The noted trademarks are registered to the respective connector brands.

VDV212-803

VDV212-803
Weight: 1.00 lbs

Ratcheting Crimper w/ Coaxial Hex Crimp Set - RG6/6QS/59 TS

Ratcheting Crimper with Coaxial Hex-Crimp Die Set

Professional CATV, Electrical, Home-Theater, Satellite and Security system crimper is perfect for fast, reliable connector installations.
Precision full-cycle ratchet action assures complete precise crimp every cycle.
Crimps meet or exceed UL Standards, where applicable.
Steel body with black-oxide finish for corrosion resistance and durability.
Preset tension for optimum performance.
Dies manufactured from heat treated high-carbon steel for excellent performance and long life.
Quick change interchangeable die sets. (Additional die sets are available.)
Thumb-screws secure die-sets for quick, easy changes. (Optional Phillips screws available.)
Safety crimp release helps eliminate rejected terminations due to incorrect positioning.
Ratchet mechanism is designed to prevent the release of the connector prior to full compression.
Yellow and black grips enhance comfort, visibility, and allow quick identification.

VDV226-011

VDV226-011
Weight: 2.00 lbs

Ratcheting Modular Cutter/Stripper/Crimper

Ratcheting Modular Crimper/Stripper

Fast, reliable modular-crimp connector installation for voice and data applications.
All-In-One Tool, cuts, strips and crimps paired-conductor cables (round STP/UTP and flat-satin phone cable).
Crimps 4, 6, and 8 position modular connectors (RJ22, RJ11/RJ12, and RJ45).
Steel body with black-oxide finish for excellent performance and durability.
Crimping dies are precision ground from high-carbon steel.
Designed for Western Electric (WE)/Stewart Stamping (SS)-type modular connectors.
Ratchet safety-release and a blade-guard on cutting and stripping knives reduce risk of injury.
Full-cycle ratchet mechanism prevents the release of the connector prior to full compression.
Yellow and black grips enhance comfort, visibility, and allow quick identification.
Three crimping dies (8-position, 6-position and 4-position).
Cable parameters: 28-22 AWG (.08 - .34 mm²) flat or round; solid or stranded telephone & data.
Not for use with AMP® connectors.
AMP® is a registered trademark of TYCO, Inc.

VDV312-012

VDV312-012
Weight: 2.00 lbs

Cushion Grip Insertion/Extraction Tool - F-Connector, 5" Shaft

Cushion Grip F-Connector Insertion/Extraction Tool

3/8"-32 Threaded-end holds standard F-Connectors for cable insertion.
5" long shaft with 7/16" socket extends reach for connecting/removing F-connectors.
Cushion-Grip handle for greater torque and enhanced comfort.
Precision machined high-carbon steel is hardened for long life.
Durable chrome finish resists corrosion and extends tool life.

VDV427-015

Punchdown Tool Blade - 110 Terminate/Terminate-Cut

VDV427-015
Weight: 0.10 lbs

VDV427-016

Punchdown Tool Blade - 66 Terminate/Terminate-Cut

VDV427-016
Weight: 0.10 lbs

VDV427-017

Punchdown Tool Blade - 66 & 110 Terminate-Cut Combination

VDV427-017
Weight: 0.10 lbs

VDV427-800

VDV427-800
Weight: 1.00 lbs

Impact Punchdown Tool w/ Combination 66/110 Terminate-Cut Blade

Impact Punchdown Tool - Combination 66/110 Cut Type

Terminate cable in variety of cross-connect panels, blocks and keystone jacks.
Spring loaded for fast, low effort seating and terminating.
Selectable (Hi/Low) impact-force settings meet industry standard specification 8762D.
Rubber finger grips and boot provide greater control and enhanced comfort.
Blade storage compartment with spring loaded locking mechanism.
Color coded yellow on the cut side of the tool.
Bayonet style (twist & lock) socket accepts most manufacturers’ tools and blades.
Induction hardened high-carbon steel for durability and long life.
Replacement blades available: 110-Blade (Cat. No. VDV427-015), 66-Blade (Cat. No.VDV427-016), 66/110 Combination Blade (Cat. No. VDV427-017), Reach Extension (Cat. No. VDV427-018).

VDV427-805

VDV427-805
Weight: 1.00 lbs

Impact Punchdown Tool w/ 110 Terminate/Terminate-Cut Blade

Impact Punchdown Tool - 110 Type

Terminate cable in variety of cross-connect panels, blocks and keystone jacks.
Spring loaded for fast, low effort seating and terminating.
Selectable (Hi/Low) impact-force settings meet industry standard specification 8762D.
Rubber finger grips and boot provide greater control and enhanced comfort.
Blade storage compartment with spring loaded locking mechanism.
Color coded yellow on the cut side of the tool.
Bayonet style (twist & lock) socket accepts most manufacturers’ tools and blades.
Induction hardened high-carbon steel for durability and long life.
Replacement blades available: 110-Blade (Cat. No. VDV427-015), 66-Blade (Cat. No.VDV427-016), 66/110 Combination Blade (Cat. No. VDV427-017), Reach Extension (Cat. No. VDV427-018).