• T-Slot Miter Gage:
  This allows you to start crosscutting wider pieces in front of the blades.

• Beveling of Saw Blade up to 46.5°:
  By using a conbenient handle at the front, the saw blade can be slightly beveled from -1.5° to 46.5° without having to use any tools
  
• Soft-Start Technology:
  A smooth start and silent running of the motor is guaranteed by having the Soft-Start-Technology.
  
• Double-clamped Parallel Fence: 
  The parallel fence is clamped at the front and back on the table and thus provides for high stability and precision. It also can be used on both sides.
  
• Integrated Table Side Extension:
  The standard integrated table side extension enables cuts up to 24 1/4" wide. It retracts into the saw for easy portability.

8 1/2" Sliding Compound Miter Saw KGS 255

• Aluminium Protective Cover:
  Protects the rails and the linear ball bearing system from saw dust and any building materials that may fall and damage the rails

• Positive Stops for Miter Cuts:
  Exact setting of the important angles 15°, 22.5°, 30°, 45° saves times with easy to find settings along with superior accuracy

• Light and Stable:
  Thanks to the low weight - very easy to transport and still stable with the new die-cast aluminium structure
  
• More Power:
  With 9 amps., the motor is steady and efficient for miter & compound miter cuts in materials up to 2 5/8"
  
• Saw Blade Lock & Tool:
  The saw blade lock and tool is integrated into saw for simple changing of the saw blade

• Dual Bevel Tilt of Saw Head up to 48°:
  For all cuts, this allows the finished side of the material to always face up, clean cutting edges are guaranteed!

• Turntable Position:
  This can be easily adjusted between 50° on left and 60° on the right side.

• Saw Blade Lock & Tool:
  The saw blade lock and tool are integrated into the saw for simple changing of the saw blade.
  
• Powerful Motor: 
  15 Amp motor, center mounted to balance the weight of the saw.
  
• Twin Horizontal Tubes:
  Horizontal tubes slide on precision ball bearings for extra stability and accuracy.

• Bevel Angle Adjustment:
  With the flip of a lever, the bevel angle can be adjusted up front easily and accurately in a matter of seconds.

• Roof Pitch Angles:
  Indicted on the miter scale for fast and accurate cuts.

• Integrated Table Extensions:
  Extends table up to 41".
  
• Patented Miter Lock: 
  Allows you to preset angles that may be used repeatedly.

• Chip Removal Indicator:
  The desired chip removal can be accurately determined before the actual planing process with no time consuming trials, eliminating unnecessary work cycles.

• Large Table Length:
  The large table length of 13" x 33" provides a large support surface and safe work area.

• Integrated Tool Storage Compartment:
  All purpose storage area for the cord, knife gauge and knife changing tools.
  
• Preset Depth Stops: 
  Eight preset depth stops for fast and accurate planing to standard thicknesses.