HVAC Tools
!

FCTMS1

Weight: lbs
Jaws are hot drop-forged of carbon steel. Bends and flattens soft sheet metal up to 22 gauge. Straight handle model and higher leverage offset handle model. Heavy duty plastic grips for user comfort. (Left to right: FCT-M-S1 3" Straight, FCT-M-S2 3" Offset, FCT-M-S6 6" Straight).  
Stock # Nominal Length Jaw Depth Jaw Width Bending
Capacity*
FCT-M-S1
FCT-M-S2
FCT-M-S6
8.25" - 209mm
8.25" - 209mm
8.25" - 209mm
1.25" - 30mm
1.25" - 30mm
1.25" - 30mm
3.18" - 78mm
3.18" - 78mm
6" - 152mm
22 ga CR
22 ga CR
22 ga CR

FCTMS2

Weight: lbs
3" OFFSET SEAMER

FCTMS6

Weight: lbs
6" WIDTH STRAIGHT SEAMER

FCTMF1

Weight: lbs

FCT-M-F1 12-inch Folding Tool
FCT-M-F2 18-inch Folding Tool
FCT-M-F3 24-inch Folding Tool

Use wide folding depth side for 1-inch folds and opposite narrow depth side for 3/8 inch folds.

 
Stock # Nominal Length Fold Depth Capacity*
FCT-M-F1 12" - 305mm 1" (25mm) or 3/8" (9.5mm) 24ga.CR/28ga. SS
FCT-M-F2 18" - 457mm 1" (25mm) or 3/8" (9.5mm) 24ga.CR/28ga. SS
FCT-M-F3 24" - 610mm 1" (25mm) or 3/8" (9.5mm) 24ga.CR/28ga. SS

FCTMF2

Weight: lbs
18" FOLDING TOOL

FCTMF3

Weight: lbs
24" FOLDING TOOL

FCT-M-F1 12-inch Folding Tool
FCT-M-F2 18-inch Folding Tool
FCT-M-F3 24-inch Folding Tool

Use wide folding depth side for 1-inch folds and opposite narrow depth side for 3/8 inch folds.

 
Stock # Nominal Length Fold Depth Capacity*
FCT-M-F1 12" - 305mm 1" (25mm) or 3/8" (9.5mm) 24ga.CR/28ga. SS
FCT-M-F2 18" - 457mm 1" (25mm) or 3/8" (9.5mm) 24ga.CR/28ga. SS
FCT-M-F3 24" - 610mm 1" (25mm) or 3/8" (9.5mm) 24ga.CR/28ga. SS

9FMW-C5

Weight: lbs
FCT-M-C5 Crimper blades (right) are 13 gauge cold-rolled steel heat-treated to a hardness of 45-50Rc. Crimps round and square duct, downspouts, etc. Compound leverage action. Heavy duty plastic grips for user comfort. FCT-M-C5S is a smaller version FCT-M-C5.  
Stock # Nominal Length Throat Depth Crimping Length*
FCT-M-C5 10" - 254mm 1.75" - 44.5mm 1.625" - 41mm
FCT-M-C5S 9.25" - 235mm 1.25" -32mm 1" - 25mm

MWT-5BC

Weight: lbs

Hardened steel blades for long-lasting

durability. Makes factory precision crimp to

throat depth of 1-1/4”(31.75mm). Heavyduty

steel handles will not bend from hand

pressure.

5-Blade Crimper - MWT-5BC

FCTMN1

Weight: lbs
FCT-M-N1 Notcher blade (right) is hot drop-forged of carbon steel. Cuts 31 deg. "V"notch. Cuts clean without slippage. Compound leverage action. Heavy duty plastic grips for user comfort.

Stock # Nominal Length Throat Depth Cutting
Capacity*
FCT-M-N1 8" - 204mm 0.8125" - 20mm 22 ga CR

FCTML1

Weight: lbs
FCT-M-L1 Snap Lock Punch
Forged jaw punches impression on metal edge that fastens into opposite rolled metal edge for forming duct and pipe. Compund leverage handle action. Heavy duty plastic grips.

Stock # Nominal Length Throat Depth Bending
Capacity*
FCT-M-L1 8" - 203mm 3/8" - 9.5mm 24ga. CR