!

P6716B

Weight: lbs
 7/8" (28mm), cuts 16 ga. cold-rolled sheet metal;
18 ga. stainless steel sheet metal
(Thick, multiple thicknesses, rolled seams, S-cleats, etc.)

26-P6300

Weight: lbs
P6300
 3/16" (4.76mm) Dia., cuts 5/32" (4mm) steel wire rope;
1/8" (3.175mm) mild steel rod;
1/8" (3.175mm) stainless steel wire rope;
3/32" (2.4mm) spring/music wire
(Hardened wire, cable, wire rope, springs, nails, etc.)

SSP6510L

Weight: lbs
SSP6510L - Special Hardness Offset Left
 These models are specially treated for cutting
hardened sheet metals such as stainless steel,
inconel, and titanium.
They have a capacity of cutting 22 ga.
stainless steel sheet metal.

SSP6510R

Weight: lbs
RIGHT CUT
SSP6510R - Special Hardness Offset Right
These models are specially treated for cutting
hardened sheet metals such as stainless steel,
inconel, and titanium.
They have a capacity of cutting 22 ga.
stainless steel sheet metal.

SSP6716L

Weight: lbs
SSP6716L - Special Hardness Regular Left
These models are specially treated for cutting
hardened sheet metals such as stainless steel,
inconel, and titanium.
They have a capacity of cutting 22 ga.
stainless steel sheet metal.

SSP6716R

Weight: lbs
SSP6716R - Special Hardness Regular Right
These models are specially treated for cutting
hardened sheet metals such as stainless steel,
inconel, and titanium.
They have a capacity of cutting 22 ga.
stainless steel sheet metal.

P6900L

Weight: lbs
UPRIGHT
LEFT CUT
Right angle blades make cutting easier in tight
spaces and overhead. Capacity to cut 24 ga.
cold-rolled sheet metal and 28 ga.
stanless steel sheet metal.

P6900R

Weight: lbs
UPRIGHT
RIGHT CUT
 Right angle blades make cutting easier in tight
spaces and overhead. Capacity to cut 24 ga.
cold-rolled sheet metal and 28 ga.
stanless steel sheet metal.

P6716AS

Weight: lbs

Power Cutters® Deep Serration Long-Cut Aviation Snips

MWT-6716AS.Cuts straight. 3-inch (76.2mm) length of cut. Use in either hand.

Wide blade opening with six deep serrations per inch to bottom

blade for secure grip of soft materials such as rubber, plastic hose,

etc. Not recommended for sheet metal.

P67S

Weight: lbs

Utility Aviation Snip

MWT-67S

Cuts wide curves and trim cuts.