Mitre & Panel Saws

Accessories

MW06496-6
SPECIAL PRICING

Was Is

WHILE SUPPLY LASTS

10" SLIDE COMPOUND MITRE SAW
                                  Miter Saw offers a unique override
                                  mechanism which allows fine tuned
                                  adjustments to the pre-set miter angle for
                                  precision cutting. Pre-set positive stops
                                  are set at 0 degrees, 15 degrees, 22.5
                                  degrees, 30 degrees and 45 degrees both
                                  left and right. Bevel Angles from 48
                                  degrees left to 3 degrees right with the
                                  non-slip locking system. Miter Angles from
                                  51 degrees left to 59 degrees right. Miter
                                  table rotates on roller bearings for smooth
                                  positive miter settings. Hardened steel
                                  tubes provide a smooth sliding surface to
                                  provide up to 12 inch crosscuts. An extra
                                  tall Flip Fence offers maximum material
                                  support throughout the cut whether miter
                                  or compound. The patented Flip Fence
                                  can be flipped, without the use of tools, to
                                  accommodate either miter cuts or
                                  compound cuts. The exclusive automatic
                                  retracting transparent lower guard
                                  maximizes blade visibility by sliding
                                  smoothly and quickly out of the line of
                                  sight during operation. An electric brake
                                  eliminates free blade spin, shortening time
                                  between cuts. Standard Equipment
                                  includes a 40 tooth Carbide Blade and a
                                  blade wrench.

6496-6
Weight: 62.50 lbs

6480-20

1.0

SAW PANEL 8

6480-20
Weight: 185.00 lbs

6486-20

1.0

MOTOR ONLY

PANEL SAW REPLACMNT MOTOR 15A

6486-20
Weight: 10.50 lbs

MW06490

10 in. Magnum Miter Saw

#6490-6 MITRE SAW 10"

                                  Milwaukee's Magnum 10 inch Miter Saw
                                  has all the features the professional
                                  needs. The powerful 15 amp motor easily
                                  cuts through hard woods. The miter table
                                  moves smoothly from one angle to another
                                  as the table rotates on roller bearings. This
                                  saw has positive stops at 0, 15, 22.5, 30
                                  and 45 degrees left and right and extra
                                  wide angles reach 51 degrees left and 59
                                  degrees right. A unique override
                                  mechanism allows fine adjustment near
                                  preset miter angles. An extra tall fence to
                                  support large work pieces and an
                                  exclusive automatic retracting lower guard
                                  provides high visibility and large capacity.
                                  Maximum width of cut at 90 degrees is
                                  5-9/16 inch wide by 2-1/2 inch high and
                                  maximum cutting height at 45 degrees
                                  miter is 3-1/2 inch wide by 2-3/4 inch wide.
                                  Includes saw, blade and wrench.

6490-6
Weight: 38.51 lbs

MW06494

10 in. Magnum Compound Miter Saw

#6494-6 COMPOUND MITRE SAW:10"
                                  This 10 inch Magnum Compound Miter
                                  Saw offers a unique override mechanism
                                  which allows fine tuned adjustments to the
                                  pre-set miter angle for precision cutting.
                                  Pre-set positive stops are set at 0
                                  degrees, 15 degrees, 22.5 degrees, 30
                                  degrees and 45 degrees both left and right.
                                  Bevel Angles from 50 degrees left to 3
                                  degrees right with the non-slip locking
                                  system. Miter Angles from 51 degrees left
                                  to 59 degrees right. Miter table rotates on
                                  roller bearings for smooth positive miter
                                  settings. An extra tall Flip Fence offers
                                  maximum material support throughout the
                                  cut whether miter or compound. The
                                  patented Flip Fence can be flipped,
                                  without the use of tools, to accommodate
                                  either miter cuts or compound cuts. The
                                  exclusive automatic retracting transparent
                                  lower guard maximizes blade visibility by
                                  sliding smoothly and quickly out of the line
                                  of sight during operation. Standard
                                  equipment includes a Carbide Blade and a
                                  blade wrench.

6494-6
Weight: 45.44 lbs

6497-6

1.0

10 in. Magnum Compound Miter Saw

SAW MITER 10 SLIDE COMP KIT

6497-6
Weight: 66.00 lbs