!
!
seek-tech-group-2013-2014_7
Utility Locating
SPEED---ACCURACY--CONFIDENCE

See Selections Below

RIDGID SeekTech provides the information needed to locate underground utilities with ease.

  • Audio and 4 easy-to-read visual locate indicators
    • Confirms good signal and locate.
    • Identifies distortion in congested areas.
  • Displays target line and shows directional changes.
  • Continually verify the quality of the locate.

...All on one screen.
 

!
SR-60 22163
Weight: lbs

22163

 SeekTech SR-60 Locator
SR-60   
SeekTech Receivers with their large display give you the
information you need when you need it to locate more with
greater certainty.

The Mapping Display confirms a good locate signal and identifies
distortion in congested areas using:
  • Target Line – Guides the operator down the line and shows changes in direction.
  • Left-Right Guidance Arrows – Points the operator to the target utility.
  • Proximity Signal and Signal Strength – Helps the operator center the locator closer to the target for more confident locates.
Other features include:
  • Continuous Depth – Increase productivity by showing depth changes in real time.
  • Omni-Seek – Increase accuracy and efficiency when searching in passive mode. Continuously searches passive power and radio bands to locate and avoid unknown metallic lines.
  • User Defined Frequencies – RIDGID SeekTech receivers can be configured with up to 30 user defined frequencies.
The SR-60 is for users wanting the fastest, easiest, most versatile receiver available. Choose the SR-60 for fast confident locates even under tough locate conditions (poor conductors, poor soil conditions, poor grounding, etc.)

Features
Can trace any frequency from 10 Hz to 490,000 Hz.
Can trace energized lines and sondes (beacons) simultaneously
Has all the ease of use and accuracy of the SR-20 but with ALL locatable frequencies.
SR-20 21893
Weight: lbs

21893

DISCOUNT PRICING!
WITH CASE!
RECEIVER,SR-20 UTILITY LOCATOR
SeekTech SR-20

Features
  • Proximity Signal
    Minimizes depth over target and maximizes relative signal strength to guide you closer to the target independent of the current flow
  • Mapping Display
    Virtually maps the utility to help guide you down the line. Shows signal distortion and line turns in real time
  • Continual Depth
    Increase productivity by showing depth changes in real time
  • Guidance Arrows
    Guides the operator to target line by minimizing signal gradient
  • Current
    Identifies current on target line for faster diagnosis of complex locates
  • Signal Strength
    Allows the operator to maximize signal strength over the target
  • Specifications
  • Active Line Trace Frequencies:      128Hz, 1kHz, 8kHz, 33kHz
  • Sonde Frequencies:
         16Hz, 512Hz, 33kHz
  • Passive Power Trace:
         50Hz, 60Hz
  • Passive Radio Trace:
         <4kHz, 4kHz-15kHz, 15kHz-38kHz
  • Weight: 3.9 lbs.
  • Power Source: 4 C-Size Batteries

  • ST-305 21898
    Weight: lbs

    21898

    DISCOUNT PRICING!
    TRANSMITTER,ST-305 UTIL 5 WATT
    ST-305 Transmitter

    Features
  • Direct Connect
    using attached Clips
  • Induction
    from optional Inductive Signal Clamp
  • Induction
    from the Tranmsitter Coils
  • Specifications
  • Frequencies: 1kHz, 8kHz, 33kHz
  • Output Power: 5 Watts, Nominal
  • Output: Any 2 Frequencies
  • Weight: 2.4 lbs.
  • Maximum Open Circuit Voltage: 240VAC 50/60Hz
  • Power Source: 6-C Size Batteries
  • ST-510 21903
    Weight: lbs

    21903

    DISCOUNT PRICING!
    TRANSMITTER,ST-510 UTIL 10WATT
    ST-510 Transmitter

    Features
  • Direct Connect
    using attatched Clips
  • Induction
    from the optimal Inductive Signal Clamp
  • Induction
    from the Transmitter Coils
  • Specifications
  • Frequencies: 128Hz, 1kHz, 8kHz, 33kHz
  • Output Power: 10 Watt, Variable
  • Display: LCD
  • Weight: 8.9 lbs.
  • Maximum Open Circuit Voltage: 240VAC 50/60Hz
  • Power Source: 8-D Size Batteries
  • ST33Q 26168
    Weight: lbs

    26168

    DISCOUNT PRICING!
    ST33Q SEEKTECH TRANSMITTER
    Features
    Distance: Induce over 8 times more current than the competition onto a target line. More current means that you can walk and trace further than ever before.
    Versatility: Induces at 8 kHz and 33 kHz for low distortion locates. In direct connect mode, the SeekTech ST-33Q can transmit at any frequency between 10 Hz and 490,000 Hz making the RIDGID SeekTech ST-33Q one transmitter than can be used with all receivers.
    Speed: More signal equals less retracing of your steps to pick up and move the transmitter. Cut your inductive trace steps in half, by only having to set up the ST-33Q once. In direct connect mode, the LCD display gives instant feedback on current flow and line resistance.
    Accuracy: Induce more current at lower frequencies. Lower frequencies are less prone to jump onto other lines in congested areas reducing distortion and increasing accuracy.
    Confidence: More current on your line means more signal to locate. Combine your experience with the information provided by RIDGID Locators and you have the tools that allow you to work through difficult traces with confidence.

    Specifications
    Output Frequencies:
    Direct Connect: (Factory Set): 128 Hz, 1kHz, 8kHz, 33kHz, 93kHz
    Direct Connect: (User Defined): Any Frequency 10 Hz - 490kHz
    Induction: 8kHz, 33kHz
    Weight: 12.15 lb. (5.5 kg) w/batteries
    Power Source: 6 Alkaline or rechargeable batteries. (D-Cells) or 12V external power supply
    Power Settings: 5 mA to 400 mA on internal batteries; High Power option to 1000 mA
    20973
    Weight: lbs

    20973

    DISCOUNT PRICING!
    CLAMP,SEEKTECH INDUCTION,4"
    Inductive Clamp
    Features
  • The RIDGID Inductive clamp
    allows users to apply a signal to a cable or pipe when connecting directly to the target conductor is not possible.
  • The clamp couples the transmitting signal onto the conductor
    which then allows users to locate using a compatible receiver, such as the NaviTrack™ or NaviTrack Scout™.
  • Two built in LED’s
    inform the user the clamp is functioning properly.
  • An integrated adapter allows users
    to attach a hotstick for out of reach lines.

  • 18688
    Weight: lbs

    18688

    TRANSMITTER,SKTECH S6-EZ NTSC
    22173
    Weight: lbs

    22173

    HARD CASE F/SR-20 UNIT