Benchtop Tools

SEE SELECTIONS BELOW

RG14628
Special Price!!

Was Is

Click Here for More Information

MS1065LZ
10" COMPOUND MITER SAW with EXACTLINE™

10" MITER SAW

Features

EXACTLINE™ LASER ALIGNMENT SYSTEM
allows operator to easily align blade with the cut line

15 AMP MOTOR
heavy duty motor powers through the most difficult cuts

SOF-TOUCH™ CONTROLS
improve comfort and grip

REPEAT-A-CUT™ FENCE
allows user to mark fence for repetitive cut

FRONT MOUNTED CLAMP
quick release clamp securely holds material in place

EXTENDED BEVEL AND MITER RANGES
0° to 47° bevel and 0° to 50° miter capacities accommodate a wide variety of cuts

LEFT SIDE TABLE EXTENSION
for increased material support

SLIDING LEFT FENCE
provides support for taller material. Adjusts for bevel cuts

2-1/2" DUST PORT
provides connection to standard dust collection systems to help keep work area clean

Specifications

Motor: 120v AC 15 Amp

No Load Speed: 5500 RPM

Blade Arbor: 5/8"

Blade Diameter: 10"

Cutting Capacities:

Baseboard Against Fence: 3-1/2"

Crown Molding Laying Flat: 4-3/4"

Baseboard Laying Flat: 6"

90° Cross Cut (nominal): 2" x 6" or 4" x 4"

45° Miter Cut (nominal): 2" x 4"

45° Bevel Cut (nominal): 2" x 6"

Weight: 34 lbs.

Includes
MS1065 Miter Saw; laser disc; table extension; carbide tipped blade; dust bag; dust guide; work clamp; wrench; operator's manual

MS1065LZ
Weight: 41.78 lbs

RG14638

R4121
12" COMPOUND MITER SAW with EXACTLINE™

Features
Work Clamp with Quick-Release Lever – securely holds material in place
Quick-Release Bevel Lock – provides users with up-front access to make quick angle adjustments
2 ½ in. Dust Port – provides connection to standard dust collection systems to help keep work area clean
Bevel Stop Pin – quick action levered pin releases or bypasses bevel detent index points with one simple motion
Dual Bevel and Extended Miter Range – 0° to 48° dual bevel and 0° to 50° miter capacities with crown molding stops to accommodate a wide variety of cuts
Expanded Cutting Capacity – gives extra material support to cut up to a 2 in. x 10 in. at a 90° crosscut and a wide range of crown molding
Zero Clearance Throat Plate – give material maximum cut through support
15 Amp Motor – heavy duty motor powers through the most difficult cuts
Sof-Touch™ Controls – improve comfort and grip
Repeat-A-Cut™ Marking Surface – allows user to mark fence for repetitive cuts
Miter Detent Thumbwheel – quick action thumbwheel releases or bypasses miter detent index points with one simple motion
Quick-Release Miter Lock – provides users with easy access to make quick angle adjustments

Specifications
Motor: 120 V, AC only, 15 Amps
No Load Speed: 4,000 r/min. (RPM)
Blade Arbor: 1 in.
Blade Diameter: 12 in.
Weight: 46 lbs.

Cutting Capacities
Baseboard Against Fence: 6 in.
Baseboard Lying Flat: 9 ¼ in.
Crown Molding Lying Flat: 7 ¾ in.
Nested Crown: 7 ½ in.
90° Cross Cut (nominal): 2 in. x 10 in.
45° Miter Cut (nominal): 2 in. x 6 in.
45° Bevel Cut (nominal): 2 in. x 10 in.

R4121

Includes
R4121 Miter Saw, Exactline™ adjustable laser guide, carbide tipped blade, dust bag, dust guide, work clamp, blade wrench, hex keys, operator’s manual

R4121
Weight: 83.50 lbs

RG14643
Special Price!!

Was Is

Click Here for More Information

LS1290LZ
12" SLIDING DUAL COMPOUND MITER SAW with EXACTLINE™

12" SLIDING CMS

Features

SOF-TOUCH™ CONTROLS
improve comfort and grip

EXACTLINE™ LASER ALIGNMENT SYSTEM
allows operator to easily align blade with the cut line

QUICK RELEASE WORK CLAMP
vertical clamp securely holds material in place

REPEAT-A-CUT™ FENCE
allows user to mark fence for repetitive cuts

DUAL SLIDING FENCES
adjustable fences on both sides of the blade to support taller material

DUAL BEVEL AND EXTENDED MITER RANGE
0° to 47° dual bevel and 0° to 60° miter capacities accommodate a wide variety of cuts

2-1/2" DUST PORT
provides connection to standard dust collection systems to help keep work area clean

15 AMP MOTOR
heavy duty motor powers through the most difficult cuts

Specifications

Motor: 120v AC 15 Amp

No Load Speed: 4000 RPM

Blade Arbor: 1"

Blade Diameter: 12"

Cutting Capacities:

Baseboard Against Fence : 4-3/4"

Maximum Cross Cut: 13-1/2"

90° Cross Cut (nominal): 2" x 12" or 4" by 4"

45° Miter Cut (nominal): 2" x 10"

45° Bevel Cut (nominal): 2" x 12"

Weight: 57lbs.

Includes
MS1290 Miter Saw; Exactline™ laser disc; work clamp; carbide tipped blade; dust bag; dust guide; wrench; operator's manual

LS1290LZ
Weight: 85.60 lbs

RG24603

Miter Saw Utility Vehicle

Features

	Quick Set-Up job-site ready in seconds
	Folds Up Easily with miter saw attached for two wheel transportation and upright storage
	Wide Base with Non-Skid Feet for stability during use
	Heavy Duty welded steel construction, built job-site tough
	Large Rubber Wheels provide superior mobility over rough terrain
	Extra Wide Steel Rollers adjust to over 8' for maximum workpiece support
	Fits Most Miter Saws mounting holes provided for RIDGID® models
	Quick and Easy Assembly merely mount wheels and roller supports

Includes

Miter saw stand, mounting hardware and operator's manual

AC9940/AC9944
Weight: 60.00 lbs

RG14663

OSCILLATING EDGE BELT / SPINDLE SANDER

OSCILLATING EDGE SANDER

Features

TWO MACHINES IN ONE
combines edge belt and spindle sanding in one high performance tool

BALL BEARING CONSTRUCTION
for smooth operation and long life

OSCILLATING AND ROTARY MOTION
for fast, burn free finishes on edges, faces, contours, inside and outside curves

TOOLLESS CONVERSION FROM BELT TO SPINDLE
changes are quick and easy. No tools required

TABLE TILES 0-48
with detents at most popular angles (0, 15, 22.5, 30, 45) sands beveled edge for super tight fits

COMPLETELY OUTFITTED
includes 4" x 24" belt, all drums and a set of sleeves so it's ready to go, right out of the box

ON-BOARD ACCESSORY STORAGE
all drums, throat plates, washers and belt mechanism store neatly on the tool

USER-FRIENDLY FEATURES
Sof-Touch™ knobs, hose adaptor with built-in sawdust collection port, recesses in base for sawhorse mounting

Specifications

Motor: 3/8 HP, 4.6 Amps 120V AC

Transmission: RPM 1725 Spindle, FPM 1350 Belt

Oscillation: 60/Min.

Stroke: 3/4"

Sanding Sleeves Provided: 1/2", 3/4", 1", 1-1/2", 2"

Sanding Drums Provided: 3/4", 1", 1-1/2", 2"

Belt Size: 4" x 24"

Includes
Sander, bed assembly with 4" x 24" sanding belt, 1/2" Sanding sleeve, 3/4", 1", 1-1/2" and 2" sanding sleeves and drums, drum washers and throat plates, operator's manual

EB4424
Weight: 48.50 lbs

RG10888

*NEW*
CM1450 ABRASIVE SAW

14" ABRASIVE WHEEL CHOP SAW
120V 15AMP 3900RPM

CM1450
Cat # 10888

14" (35.6 cm) ABRASIVE CUT-OFF MACHINE

Features

Ergonomic "d" Handle
Verified by user research, Provides greater control while cutting
15 Amp High Torque Motor
The largest motor allowed by standard 15A/120V circuits. Powers through rebar; bar stock or complete bundles of metal studs;
Heavy-duty Construction
Long life, hardened cut steel gears, durable cast aluminum motor housing, wide, cast iron base with non-slip rubber feet for stability.
45 Left - 45 Right Pivoting Fence
for accurate miter cuts
Tool-less Miter Adjustment
Allows quick and easy adjustment of the fence for all miter angles.
Quick Release Vise
Makes clamping and adjusting stock convenient
Job Site Features
Carrying handle, hold down chain stablilizes head in transport; arbor lock; on board wrench storage.

Specifications

Motor: 15 Amp., 120 V AC
Speed: 3900 RPM
Wheel Diameter: 14" (35.6 cm)
Arbor Diameter: 1" (2.54 cm)
Pivoting Fence: 45 L- 45 R
Weight: 55lbs (24.8 kg)
Steel Studs (cut specs) : Full Bundle
Pipe OD (cut specs): 5" (12.7 cm)
Bar Stock (cut specs): 2" (6.4 cm)

Includes
Cut-off machine, 14" abrasive wheel, arbor wrench, operator's manual

CM1450
Weight: 55.00 lbs

RG42956

BOX OF 10

14" ABRASIVE BLADES F/CM1450 CHOP SAW
1"ARBOR METAL CUTTING

RG42956
Weight: 13.60 lbs